FUJI NXT XPF AIM 8MM W08 W08C W08F FEEDER SMT Feeder Test in machine before shipping

FUJI NXT XPF AIM 8MM W08 W08C W08F FEEDER SMT Feeder Test in machine before shipping:

Description:

Surface mounting was originally called "planar mounting".

Surface-mount technology was developed in the 1960s and became widely used in the mid 1980s. By the late 1990s, the great majority of high-tech electronic printed circuit assemblies were dominated by surface mount devices. Much of the pioneering work in this technology was done by IBM. The design approach first demonstrated by IBM in 1960 in a small-scale computer was later applied in the launch Vehicle Digital Computer used in the Instrument Unit that guided all Saturn IB and Saturn V vehicles. Components were mechanically redesigned to have small metal tabs or end caps that could be directly soldered to the surface of the PCB. Components became much smaller and component placement on both sides of a board became far more common with surface mounting than through-hole mounting, allowing much higher circuit densities and smaller circuit boards and, in turn, machines or subassemblies containing the boards.

Supply Ability:

Supply&repair all FUJI spare parts at a good price:

• FUJI HOVER DAVIS 8MM FEEDER
• FUJI HOVER DAVIS 16MM FEEDER
• FUJI HOVER DAVIS 24MM FEEDER
• FUJI HOVER DAVIS 32MM FEEDER
• FUJI HOVER DAVIS 44MM FEEDER
• FUJI CP6 HIMV 134 CPU
• FUJI CP6 SCSI BOARD FSC30D
• FUJI CP642(643) SERVO CARD IS70C
• FUJI CP642(CP643) 4800 VISION CARD
• FUJI GL5 CPU BOARD VM1152A
• FUJI GL5 VISION CARD VM1710
• FUJI IP3 4800 VISION CARD
• FUJI QP2 PMC PCB K2091Z JZMMC-CP200A
• FUJI QP2 PMC PCB K20913 JZMMC-CP200A
• FUJI QP341 LIGHT ADJUSTMENT BOARD FH1107B0
• FUJI XP IO BOARD FH1249A

Specifications:

Stock Advantage:

SMT Application:

Although it is possible to use some SMT components for home construction, great care is required when soldering them. Additionally even the ICs having a wide pin spacing may be difficult to solder.

Those with fifty or more pins cannot be soldered without special equipment. They are intended only for large scale manufacturing. Even when working on boards that have already been built great care is needed. However these SMT components offer great cost savings to manufacturers and this is why they have been adopted. Fortunately for the home constructor, traditional leaded components that can be soldered manually are still widely available and offer a much better solution for home construction.